Monday, June 16, 2014

Snake Tote Bag

I picked up an awesome screen printed tote bag by Mimi Chrzanowski at TCAF this past May. I loved the print so much I got it even though it was not my favorite size of tote bag, which meant I would eventually get around to altering it to be just the right size for me.


The original size of the bag is about 12x12", which is a fine size and will fit an LP or two, but a little small for me to use on a regular basis.


 Luckily, since I collect fabric I had a forest green cotton canvas that complemented the colors in the print and the minty green fabric of the bag.


I ripped the seams apart on the original bag with the plan to add the dark green cotton fabric to the sides, ending up with a new bag size of 17 inches wide by 14 inches deep with a flat bottom.


Since I was already ripping this whole thing apart I decided to add a little interior pocket with a zipper for my wallet.


When I make things for myself I freely add all sorts of found things that have been sitting around for a long time. I added this ant ranch patch and some ric rac to the interior pocket.


I didn't have enough of the minty green straps to just attach them back so I made longer straps from the forest green canvas adding a gold lamé stripe and more purple ric rac.


I folded the bottom in to make a flat base, giving the bag some depth.


If you fold the bottom before you sew the side seam you can catch the base. Sew up the sides. I wanted to keep as much height from the original bag as possible so I create a facing to finish off the top edge instead of folding over the top to make a hem. I also added an interior loop that I can clip my keys onto.


The finished bag now holds about 20 records, not something I carry around often but it helps explain the size change.


Thursday, June 5, 2014

Custom Plush Toy: Skittles

Cartoonist Sophie Goldstein contacted me in the fall of 2013 to see if I would create a plush toy of her character Skittles as one of the rewards for her kickstarter campaign. Since there is a bit of unknown when you start a kickstarter campaign; we weren't sure how many people would want the toy as a reward as well as if the campaign would succeed at all. So as her campaign kicked off I had only done some speculative sketches of what this toy would look like. Fortunately, the kickstarter campaign was a rousing success and exceeded its goal to take her web comic Darwin Carmichael is Going to Hell and collect it in a printed book. Once the campaign ended, Sophie wanted 70 Skittles plush made to fulfill the rewards, so I had to get to work!

STAGE ONE: Sketches

Since Sophie and her co-creator Jenn Jordan have been creating their web comic since 2009, there are tons of reference images of Skittles. Using the comics as reference, I made some rough sketches exploring some shape options and trying to determine what the toy should look like.
Sophie wanted the Skittles toy to have floppy legs but mostly fall into a sitting position. I tightened up the sketches and did a three view turn around that would should the details that were necessary for me to reference once I got started building it.


STAGE TWO: Prototype

Once the sketch was approved I got started making a muslin mock up. I didn't use the final fabric yet because it takes awhile just to get the shaping right and it would have been a waste of good fabric, so start shaping in inexpensive muslin. Once I had a shape that looked right to me, I sent photos to Sophie. Based on her feedback I made some tweaks but ultimately got a shape that looked good. Since the muslin doesn't necessarily act like the finished fabric I have to be aware of that during construction. I knew the eyes would be made of a knit fabric because I didn't want any seams and I needed the stretch, so even on the rough prototype I used a knit fabric to make the shape come out correctly.



 With a muslin prototype that looked good, I needed to finalize the fabric choices. Since Sophie and I don't live in the same place I sent her lots of different fabric swatches to choose the materials of Skittles from. This way she could feel and see the actual colors that the toys would be made of.



STAGE THREE: First Finished Toy

Once the fabrics were approved and ordered, I got started on making the first finished toy.




STAGE FOUR: Making 70 pieces

With the first piece completed, I now set on making the rest of the 70 pieces. Since I was cutting out so many pattern pieces, to stay organized, I kept them all in separated bags and just grabbed them as I assembled each section.

All the ears, folded and ready to be sewn closed before attaching them to the head.

Hand sewing the eyes to the face. Since they needed to be a specific half dome shaped it made more sense to have them be supported by a foam under structure instead of trying to create the sphere with stuffing. That required them to be separately attached by hand.

Front half of the bodies assembled.

The completed seventy plush Skittles toys packed and ready to be shipped out.

This was the most of a single toy that I've made all at one time. I learned a lot about small scale mass production, specifically trying some new tools to speed up the cutting process. I finally got a rotary cutter which let me cut out some of the larger pieces faster. I researched some craft cutters to see if they could cut out thicker fabric, hoping that would help me not have to cut all the pieces out myself. Unfortunately all the paper/fabric cutters I  looked into didn't show thick textured fabrics. I still want to see if a laser cutter could speed up the cutting process, but that will have to be for another project.